Paint Calculator for Haymes Paint

Haymes Ultra Premium interior, ceiling and exterior paints at the coverage their data sheets give, planned in the tin sizes Haymes sells.

Units
What you are painting
Room 1

Not painted: doors and windows width × height

Doors
Windows
Paint
Coats

Haymes Ultra Premium Interior Expressions Low Sheen: up to 16 m² per litre per coat, as the maker states it (Australia range, checked September 2026). Sold in 15 L, 10 L, 4 L, 2 L, 1 L. The maker advises 2 coats. Maker's page

Can sizes on sale

Paint needed
–
Area to paint in each room
RoomWallsCeiling

Estimates for planning. Textured or porous surfaces take more paint than a smooth, sealed wall.

Haymes paints and tins

In the paint calculator below, Haymes Ultra Premium Interior Expressions Low Sheen is picked, at up to 16 sqm/L from its data sheet, and the tins are the sizes the white base comes in at the Haymes shop, 1 to 15 litres. Deeper tint bases come in fewer sizes; untick any your store can’t tint.

The bedroom already in the calculator works out at about 6 litres (walls and ceiling, two coats), bought as a 4, a 2 and a 1 litre tin. Expressions Matt, Coverplus, the Interior Ceiling Flat and both Exterior Solashield finishes are in the Paint menu too.

Porosity and profile

Every Haymes data sheet ties its coverage to three things: the porosity of the surface, its profile and how the paint is applied. A sealed, smooth wall rolled evenly gets close to 16 sqm/L. Rough render, textured ceilings and fresh plaster take more, so drop the figure in the box for those.

Exterior and bare timber

Switch to House exterior for Solashield. Solashield Low Sheen needs two coats at least, its data sheet says, or three on bare timber, which means raising Coats to 3 for new weatherboards or fascias before you order.

Haymes paints in the calculator: the range sold in Australia

PaintForCoverage, as statedTins
Ultra Premium Interior Expressions Low SheenWallsup to 16 m² per litre15 L, 10 L, 4 L, 2 L, 1 L
Ultra Premium Interior Expressions MattWallsup to 16 m² per litre15 L, 10 L, 4 L, 2 L, 1 L
Ultra Premium Coverplus Interior Low SheenWallsup to 14 m² per litre15 L, 10 L, 4 L, 1 L
Ultra Premium Interior Ceiling FlatCeilingsup to 16 m² per litre15 L, 10 L, 4 L, 2 L, 1 L
Ultra Premium Exterior Solashield Low SheenOutside wallsup to 16 m² per litre15 L, 10 L, 4 L, 2 L, 1 L
Ultra Premium Exterior Solashield MattOutside wallsup to 16 m² per litre15 L, 10 L, 4 L

What one room takes in each

Two coats. Rooms: 4 × 3.5 m room with 2.5 m walls, one door, one window, walls and ceiling (ceiling only for a ceiling paint). Outside: 8 × 10 m house with 5.2 m walls and two gables.

PaintAreaPaint, 2 coatsBuy
Ultra Premium Interior Expressions Low Sheen (room, 16 m²/L)48.6 m²6.1 L1 × 4 L + 1 × 2 L + 1 × 1 L
Ultra Premium Interior Expressions Matt (room, 16 m²/L)48.6 m²6.1 L1 × 4 L + 1 × 2 L + 1 × 1 L
Ultra Premium Coverplus Interior Low Sheen (room, 14 m²/L)48.6 m²6.9 L1 × 4 L + 3 × 1 L (fewer cans: 2 × 4 L)
Ultra Premium Interior Ceiling Flat (ceiling, 16 m²/L)14 m²1.8 L1 × 2 L
Ultra Premium Exterior Solashield Low Sheen (house, 16 m²/L)189.8 m²24 L2 × 10 L + 1 × 4 L (fewer cans: 1 × 15 L + 1 × 10 L)
Ultra Premium Exterior Solashield Matt (house, 16 m²/L)189.8 m²24 L2 × 10 L + 1 × 4 L (fewer cans: 1 × 15 L + 1 × 10 L)

Coverage per coat for the Haymes range sold in Australia, from the maker's pages linked above, checked September 2026. Haymes and its product names are its owner's trademarks, used only to describe the products; Meadow Tools is not affiliated with or endorsed by Haymes.

Paint CalculatorSomeone shared their result

Suggested