How to plan a room in 3D
- Set up the room. Open the Rooms panel and type the width, length and ceiling height, measured inside the walls, or tap a common size; the arrows by each wall resize it as you drag, showing every wall's length. Pick metres or feet, L-shape if the room has a corner cut out, or Custom for walls at any angle: drag the round handles on the corners, drag the + on a wall to add a corner, or type each wall's length and corner angle. Walls that would cross each other are refused. Sizes can be typed as
3.6,3,6,360cm,12'6"or12 ft 6; a plain number that only makes sense in another unit, like 300 in a metre field, is read as centimetres and the panel says so, with Undo. Several sizes at once work too, always in the order width, length (or depth), height, whichever of those fields you type in:4 x 3.6 x 2.5 msets the room, a product size like84 x 38 x 34 insets a piece, and90 x 210 cma door. Type the unit with them: without one, the numbers are read in the field's unit. - Add doors and windows. In Doors & windows, pick a door, double or sliding door, doorway, garage door or window, then click (or tap) the wall where it goes. Drag it along the wall, or select it to type its size and position and choose its hinge side and swing. A size that doesn't fit is set to the nearest that does, with Undo.
- Add rooms and floors. + Bedroom, + Kitchen and the others in Rooms add a room that shares a wall with yours, with a doorway through it; a door on a shared wall always goes through to the next room. The ✥ handle moves a room, snapping it onto its neighbour's wall. The strip at the top of the view switches rooms and floors (G, 1, B…), + Room adds a room next to this one, and + Floor adds a floor above, with the floor below drawn dashed in Top view. Stairs (straight, L, U, winder, spiral or curved) open into the floor above, marked DN.
- Furnish it. The Furniture panel has over 200 pieces in 13 groups: US, UK and European beds, sofas and sectionals, TVs from 32 to 85 inches, rugs in standard sizes, pianos, kitchen cabinets in standard widths and appliances, bathtubs and shower trays, laundry, office and kids' furniture, outdoor sets, lights, radiators, columns and stairs. Search it by name (queen bed, 65 tv, 24″ cabinet), and Recent keeps the pieces you used last. Tap one and it lands in a free spot. Drag it across the floor; close to a wall it snaps flush against it.
- Make it yours. Selecting a piece shows a bar under the room with Turn, Copy, Delete and Edit (a delete can be undone right there); Edit opens its details (on a wide screen they open beside the room by themselves): exact width, depth and height, height off the floor (wall cabinets, a mirror), rotation and colour, plus duplicate and delete. For a few pieces, Store size sets a real product's overall size, with a link to the page it was read from and the date. Near an angled wall, a piece turns to sit flush against it. The Rooms panel names each room and changes its walls and floor: wood, tile, carpet or concrete, in any colour.
- Check it from above. Top shows the room as a plan with every wall's length, each piece's name, and for the selected piece its size and the gap to the nearest wall or piece on each side.
Moving around the 3D view
Drag empty floor to turn around the room, scroll or pinch to zoom (or use the + and − buttons at the edge of the view), and right-drag (or drag with two fingers) to pan. Fit brings the whole room back into view. A short tip on the view says what you can do with whatever is selected; each tip goes once you have used it, and its ✕ turns them off. The walls on your side fade down as you turn, so you always see in. On a phone, one finger on a piece moves it, and one finger anywhere else turns the view.
Every control floats on the view, and on a phone the panels slide up from the bottom. The full-screen button gives the planner the whole display with every control still there. On an iPhone, where Safari offers this kind of full screen only on iPad (per MDN's compatibility table, as of September 2026), the planner covers the page instead.
On a keyboard, a selected piece moves 1 cm per arrow key (10 cm with Shift), R turns it 90°, [ and ] turn it 15°, Del removes it, Ctrl+D duplicates it and Ctrl+Z undoes. D and W start a door or window, Page Up and Page Down change floors, and ? lists every key. Esc closes the open panel first, then leaves full screen.
Walking through the room
Walk puts you just inside the first door at eye height, 1.6 m (5′ 3″) unless you change it. Walk with W A S D or the arrow keys and click the view to look around with the mouse; on a touch screen, the joystick walks and dragging the view looks around. Walls and furniture stop you, so you feel whether the gap by the bed is really a walkway; doors are open, and lead into the next room on the same floor.
Reading the marks
- Red: two pieces overlap, in plan and in height. A chair tucked under a table overlaps too. A lamp raised onto a nightstand doesn't clash, because its height off the floor puts it above.
- Amber: a piece sticks out through a wall, which usually means the room is smaller than the piece's spot or it needs turning.
- Rugs never count as overlapping: they lie under everything else.
Sizes on the plan are to the centimetre in metric and to the half inch in feet. The furniture starts at typical sizes. Standard sizes come from the makers' own pages (as of October 2026): US beds from Casper (twin 38 × 75 in, full 53 × 75 in, queen 60 × 80 in, king 76 × 80 in, California king 72 × 84 in), UK and European beds from Silentnight (UK double 135 × 190 cm, king 150 × 200 cm; European double 140 × 200 cm, king 160 × 200 cm; super king 180 × 200 cm), US kitchen cabinets from KraftMaid (base cabinets 24 in deep and 36 in high with the countertop, wall cabinets 12 in deep), and the 52-inch ceiling fan from Hunter. Measure your own pieces and type their real sizes before you decide anything.
IKEA furniture by name and size
The IKEA chip in Furniture lists 1,347 IKEA products, from KALLAX shelving units and PAX wardrobes to MALM beds and METOD kitchen cabinets, grouped by series. Pick a size from a product's list and tap it to add it. The search finds them too: type a series with or without its accents (söderhamn or soderhamn), add a size (pax 100), or a bed size word (malm queen finds the 160 × 200 cm MALM). Selecting a placed IKEA piece shows its product, its other sizes and a link to its page.
The sizes are the overall dimensions on IKEA's official store for Greece (ikea.gr, the European range), as of October 2026, and each product links to the page its size is from. Stores in other countries, the US above all, sell some products in other sizes, so check your own country's page before you buy. The pieces are drawn with the planner's own shapes, not IKEA's models or pictures. Meadow Tools isn't affiliated with IKEA.
Stairs: rise and going
Set a stair's steps and width and the planner shows each step's rise and going (its depth), with a note when they fall outside England's Approved Document K (2013 edition, Table 1.1, as of October 2026) for a stair in a home: a rise of 150 to 220 mm, a going of 220 to 300 mm, a pitch of at most 42°, and twice the rise plus the going normally 550 to 700 mm. For spiral stairs only the rise is compared. Rules differ by country: check yours.
Measuring your room
Measure each wall at floor height from corner to corner, and the ceiling from the floor. Note where each door and window starts from a corner, its width, and each window's sill height. Old rooms are rarely square: if opposite walls differ, use the shorter length so the plan never promises space you don't have. Leave room for what the planner doesn't draw, like radiators and a door's swing (the printed plan draws each swing).
Sharing, saving and printing
Your rooms and floors are saved in this browser as you work, so they're there next time. Share result copies a link (or opens your phone's share sheet) that shows your finished room, or every room and floor of your home, in 3D to whoever opens it, with a button to load it into their own planner. The link holds only the numbers, names and colours. The ⋯ menu saves a to-scale floor plan of the floor you're on, every room with its dimensions, as a PNG, prints it on one page, or saves the 3D view you're looking at.
Nothing is uploaded and there is no account. Without WebGL (off in some browsers and privacy modes), the tool shows the floor plan and you can still plan by typing sizes.
More tools for the home
The paint calculator, the wallpaper calculator and the flooring calculator can read the room you're editing here, custom shapes included, and work out the paint, rolls or flooring it needs. Prefer a pencil for the first sketch? Print graph paper at one square per 25 cm or per foot.